785 Safecoat™ Clear

785 Safecoat™ Clear provides protection to concrete floors, preventing entry to oil, grease and other contaminents and provides a readily maintained finish in car parks, workshops, factories, and warehouses. 785 Safecoat™ Clear hardens the surface of concrete and eliminates dusting. Resistant to a wide range of chemicals, it can provide an economical and hygenic flooring finish for the chemical, food and beverage, and other industires. 785 Safecoat™ Clear can also be used as a primer/sealer for 790 Safecoat™ over a porous substrate.

785 Patch and Screed (with added aggregate and sand) is normally used to fill holes, cracks and other defects prior to coating floors and walls. It may be ised as a repair mortar for spalling concrete. 785 Safecoat™ can be applied as a skim coat over a rough surfaces to improve overallsmoothness and it may be used to form coves.

790 Safecoat™ may also be applied as a floor topping of 3 to 6mm (depending on choice of aggregate) to provide an extremely abrasion and chemical resistant floor for heavy traffic and severe conditions

With the aid of formwork, 785 Safecoat™ Clear can be used to form plinths, pedestals, etc. It may also be mixed with Evic lightweight filler for overhead patching, etc.

785 Safecoat™ is a 100% solids, two-pack epoxy resin binder for sealing or priming concrete or for adding sand or graded aggregate to create a solventless epoxy resin binder for mortars and screeds.

Safecoat™ provides protection to concrete floors preventing attack by a wide range of chemicals. It will prevent entry of oil, grease and other contaminants and provide a readily maintained finish in undercover carparks, workshops, factories and warehouses. Safecoat™ also resists general staining and provides an economical and hygienic finish which guards against bacteria growth – ideal for processing facilities across many industries. 790 is a pigmented variant available in a range of standard and custom colours, while 785 is a clear product for use as a sealer or mortar for patching concrete.

Safecoat™ has been designed to be resistant to abrasion and chemicals for interior use. Safecoat is slippery when wet and requires the addition of aggregate included in the “Less Slip” system. Aggregate can be added immediately prior to application or it can be cast over the still-wet first coat. These methods increase surface safety in areas such as ramps, walkways, stair treads and doorways.